[...] Posted January 7, 2008 Share Posted January 7, 2008 I was reading Colin's note where he is making up this new titration system. I would be very interested in it . Here is my info and you decide. I started taking Xanax to help me sleep about 15 years ago. I take 1/2 mg every night before bed. I break a 1 mg tablet in half. Now after all this time I have finally reached the point where my dosage is not enough and I either have to take more or quit. I have decided to quit. I know this dosage seems small but if I miss my dose, it gets tough pretty quick. I have a pretty busy schedule so I want to try and stop slowly so it hopefully won't effect my daily duties too much. I was thinking 10% to start then ? Can you offer any ideas? I was going to try and just cut my 1 mg pills but how in the world do I get 10% off of that? Thanks in advance for your help and ideas. Link to comment Share on other sites More sharing options...
[el...] Posted January 7, 2008 Share Posted January 7, 2008 Hello Nuvi! Good decision. Well, xanax comes in .5mg pills, and even .25mg. If your doc would be willing to write you a script for one of these dosages, you could feasably direct taper from the pill. If you quartered the .5, and reduced by a quarter, this would amount to a 12.5% taper. Some feel this is a bit too high. It might be for you, considering how long you have taking them. But if you got .25mg pills and quartered those, this would be a 6.25% cut. Also you should taper at a rate of every week or two, adjusting that to how you are feeling. By the way, no benzo dose is a small dose, if you've been taking it on a regular basis. Your body still is accustomed to it, and it will still hurt to withdraw, no matter what the dose. If the direct taper suggestions don' t work for you, a titration would be the way to go. We will help you with that. Linda Link to comment Share on other sites More sharing options...
[el...] Posted January 7, 2008 Share Posted January 7, 2008 Your body still is accustomed to it, and it will still hurt to withdraw, no matter what the dose. Just to add to this statement, I meant if you cold turkey or taper too fast! It doesn't have to hurt (or at least minimally) if done sensibly. Link to comment Share on other sites More sharing options...
[...] Posted January 7, 2008 Author Share Posted January 7, 2008 Thanks Eljay for the fast response. I am sure I can get a new prescription but I just had my last one filled about a week ago. I feel my Dr. thinks I should up my dose a bit and not worry about this but I don't think this is the answer for me. I want off this drug now. Link to comment Share on other sites More sharing options...
[bo...] Posted January 7, 2008 Share Posted January 7, 2008 Hi Nuvi Xanax is very powerful for our purposes it equals 10mg of Valium so you are very wise to look at tapering as a sensible option, dry pill tapering is certainly an option harder to accomplish with Xanax but doable. The other option is titration which involves turning your Xanax into a liquid solution which then allows for smaller more controlled reductions. Sounds hard but isn't very difficult. Let us know how you wold like to approach it, good luck Take Care Bob Link to comment Share on other sites More sharing options...
[...] Posted January 7, 2008 Author Share Posted January 7, 2008 titration sounds like the way I'd like to do this. Link to comment Share on other sites More sharing options...
[si...] Posted January 7, 2008 Share Posted January 7, 2008 hi welcome to benzo buddies - so glad to have you here. Link to comment Share on other sites More sharing options...
[...] Posted January 7, 2008 Author Share Posted January 7, 2008 thanks Silver Link to comment Share on other sites More sharing options...
[Co...] Posted January 7, 2008 Share Posted January 7, 2008 Nuvi, If you are unable to obtain the 0.5 and 0.25mg tablets, then I can work out titration schedule for you. You mention 10% cuts, but how often? You see I do need a figure like 10%, but instread of set cuts every week or two, the titration system means daily or near daily cuts that add up to 10% (or what ever figure you desire), but gradually over the time 1 or 2 weeks (or whatever time period you decide upon). 10% over 10 days is probably about average, especially if you have not experienced any major difficulties with previous cuts, but you will need to tell me the taper rate you desire. Additionally, you will need measuring cylinder - 100ml marked at 1ml intervals is ideal, but we can work with pretty much anything. So, I will need to know the size of the cylinder and the size of the increments. Link to comment Share on other sites More sharing options...
[si...] Posted January 8, 2008 Share Posted January 8, 2008 the master has appeared. Link to comment Share on other sites More sharing options...
[...] Posted January 8, 2008 Author Share Posted January 8, 2008 10% over 10 days is what I would like to try. Would Walgreens have one of those measuring devices? Link to comment Share on other sites More sharing options...
[Co...] Posted January 8, 2008 Share Posted January 8, 2008 I've no idea - I live in the UK. You local pharmacy should be able to get one or order one. If not, they are easy and cheap to obtain on the Net. Link to comment Share on other sites More sharing options...
[bo...] Posted January 8, 2008 Share Posted January 8, 2008 Hi" they should I simply used a baby dropper marked in 1 ml's and a measuring cup with ml's on it. Link to comment Share on other sites More sharing options...
[...] Posted January 8, 2008 Author Share Posted January 8, 2008 ok thanks. I'll find one asap. Link to comment Share on other sites More sharing options...
[bo...] Posted January 8, 2008 Share Posted January 8, 2008 good theres a few tricks when mixing, but stay in contact with Colin as he is willing to set up your schedule after you answer his questions Take Care Bob Link to comment Share on other sites More sharing options...
[Co...] Posted January 8, 2008 Share Posted January 8, 2008 Nuvi, As Bob wrote, there are simpler ways to to titrate than the method I worked up. My method is mostly used by those requiring extreme control over their taper. You can go with Bobers approach if you prefer - it is probably all you need! Link to comment Share on other sites More sharing options...
[...] Posted January 8, 2008 Author Share Posted January 8, 2008 Colin I will try to find the supplies tomorrow. I will let you know how it goes. Thanks to all for your help. Link to comment Share on other sites More sharing options...
[bo...] Posted January 8, 2008 Share Posted January 8, 2008 I just wanted to let you know that Colin and I Have the same exact system, and there is no difference, I just felt I could be precise with the equipment I suggested. I only meant that there are ways to make up the solution after you follow Colins instructions. best of luck Bob Link to comment Share on other sites More sharing options...
[...] Posted January 8, 2008 Author Share Posted January 8, 2008 ok Colin. I picked up the supplies today. Got the 100ml in 1 ml stages plus a good pill crusher. Link to comment Share on other sites More sharing options...
[si...] Posted January 8, 2008 Share Posted January 8, 2008 good for you - someone will be by to help you - not sure when - but someone will be by Link to comment Share on other sites More sharing options...
[Co...] Posted January 8, 2008 Share Posted January 8, 2008 Nuvi, I'll work out schedule for you tomorrow. I'll base it on 10% taper over 10 days. What date would you like to start your taper? How many pills do you take per day (and dose of the pills). If I understand correctly, you take half of a 1mg tablet per day. Would it be OK to base the taper on one whole tablet (you will take half of the liquid - equivalent to half a tablet)? You can save the remaining liquid for the second day, so you will be loosing nothing, and it is more accurate than splitting the pill. Link to comment Share on other sites More sharing options...
[...] Posted January 8, 2008 Author Share Posted January 8, 2008 I take 1/2 mg a day in the form of a 1 mg tablet which I break in half. It will be fine to use 1 mg tablets for a 2 day supply. I would like to start this on friday if possible. I can wait till monday if I have to. Thanks in advance for your time to put this together!! Link to comment Share on other sites More sharing options...
[Co...] Posted January 9, 2008 Share Posted January 9, 2008 No, no need to wait that long. If you are keen to get on, I should be able to post it tomorrow so that you have it ready for Friday. The table comes with dates supplied for each new cut, this is why I need a start date. Link to comment Share on other sites More sharing options...
[...] Posted January 9, 2008 Author Share Posted January 9, 2008 sounds good Colin. Lets get started. :'( Link to comment Share on other sites More sharing options...
[el...] Posted January 9, 2008 Share Posted January 9, 2008 sounds good Colin. Lets get started. :'( Dont cry Nuvi! You're going to be fine. Link to comment Share on other sites More sharing options...
Recommended Posts